1. Use the wire twister to twist a 3’ length of all three colors of Artistic Wire together into a tight coiled wire.
2. Wrap the coiled wire around the 10mm dowel on the Jump Ring Maker Tool.
3. Remove coil and cut rings, taking time to cut both ends of the rings flush.
4. Build the chain by attaching a twisted ring, solid plated ring and a second twisted ring to a 10mm jump ring. Slide a solid ring, twisted ring and solid ring into the first ring trio. Continue alternating links until you reach the 22nd link which should be a solid ring, twisted ring, solid ring link.
5. Attach this to a single 10mm jump ring.
6. Create a wrapped wire hook using the ice blue Artistic Wire.
7. Hammer the wire hook flat using the flat end of the ball peen hammer on the steel block. Put the pad underneath to deaden the sound.
8. Attach the hook to one end of the bracelet.
9. Create three coiled dangles using the star tipped headpins and your beads.
10. Attach these to a 10mm jump ring and slide that on the open 10mm jump ring on the end of your bracelet. |
|
