Beadalon - Eclectic Filigree Earrings

• Eclectic Filigree Earrings •

• Materials & Tools •

• 2 Beadalon silver filigree rectangle ring end connectors
• 6” length of silver small cable chain
• 8 silver 6mm jump rings
• 6 silver 8mm jump rings
• 6 silver 5.3mm 1-hole discs
• 4 silver 9.4mm 1-hole discs
• 2 silver 9.4mm 2-hole discs
• 2 silver 12mm 1-hole donut discs
• 2 silver ear wires
• Chain Nose Pliers
• Nipper tool

Click Here to Enlarge

• Instructions •

1. Attach an ear wire to the top loop on the filigree component.

2. Cut three 1” lengths of silver chain.

3. Use a 6mm jump ring to attach a piece of chain and a 5.3mm 1-hole disc to each outer loop on the filigree component.

4. Use a 10mm jump ring to attach a 9.4mm 1-hole disc to the last link on each piece of chain that’s attached to an outer loop on the filigree component.

5. Use a 6mm jump ring to attach a 9.4mm 2-hole disc to the center loop on the filigree component.

6. Use a 6mm jump ring to attach a piece of chain and a 5.3mm 1-hole disc to the lower hole on the 9.4mm 2-hole disc.

7. Use a 10mm jump ring to attach a 1-hole donut to the last link on the center chain.