Beadalon - Hammer and More

• Hammer and More •

Rubber Bench Block

Use this block under a traditional steel bench block to absorb the shock from striking the steel block with a hammer. The Rubber Bench block can also be used by itself to limit the amount of marring on the front side of wire or sheet. Take care when hammering on the rubber block as the energy from the hammer will transfer back to the hammer.
4” x 4” x 1” (10.2 cm x 10.2 cm x 2.5 cm)

Part# 228S-220

Chrome Plated Mini Steel Bench Block
with Hammer

Artistic wire Mini Steel Bench Block and Hammer combine the two most often used tools when flattening or strengthening Artistic wire designs. Lightly hammer formed Artistic Wire shapes on the Bench Block with the Hammer to flatten and strengthen the design for longer wear life.

Part# 228K-100

Chrome Plated Mini Steel Bench Block

The Artistic Wire Mini Steel Bench Block is smaller and thinner making it versatile for travel or use at home. The block is much lighter with the same benefits as larger heavier Bench Blocks. 1.875” x 1.875” (4.7 cm x 4.7 cm).

Part# 228S-200

Ball Pein Hammer

Ball Pein (or Peen) hammer is used to peen (harden or shape) material. The round hemispherical head marks wire, sheet or other materials with nice round peens or dents. This can be for aesthetic appearance and also for hardening the material being hammered. The other side of the hammer can also be used to harden wire or other materials without the small round dents as with the pein or peen side. High quality polished head securely attached to a quality wood handle.

Part# 228A-014

Designer Chasing Hammer

Large flat head is used to flatten soft-tempered wires such as Artistic Wire. Round head can be used for indenting wire and metal. Wooden handle allows for a secure grip, making flattening wires easier. Use with Beadalon Anvil or Bench Block to strengthen and flatten designs made with ColourCraft and other wires. 10 inches (25.3cm).

Part# JTCHASHAM1

Nylon Head Hammer

Two large flat heads made of white nylon, perfect for flattening German Style, Artistic Wire and all other craft wires after shaping. Flattened wire is stronger (work hardened) and holds shape better. Use with the Beadalon Anvil or Bench Block. 10 inches (25.3cm).

Part# 228S-010

Steel Bench Block

This hefty Steel Bench Block is useful for shaping and flattening wire forms. Create custom pieces with Artistic Wire and German Style Wire using the Bench Block and Chasing Hammer. 3" x 3" x .75" (75mm x75mm x 20mm).

Part# JTBLOCK1

Bench Block/Anvil Pad

Stitched leather pouch filled with sand to absorb the energy, noise, and vibration caused by hammering on a Bench Block or Anvil to flatten wire or chase metal. 4x4 inch (10.2x10.2cm).

Part# 228S-018

Desginer Desktop Anvil

This miniature steel Anvil is great for forming Artistic Wire and precious metal wires. One round horn and one flat horn with a hole for riveting and bending. It features a large flat working surface for chasing (metal and wire shaping and forming the front side of the work), bending corners, and flattening wire to harden it. For use with the Beadalon Chasing Hammer. The Anvil is a must for making flattened hook and eye clasps with Artistic Wires. 1.1 lbs. (18 oz); 1.673 inches x 4.331 inches x 1.181 inches (4.25cm x 11.0cm x 3.0cm).

Part# JTANVIL1