1. Cut black organza in two pieces. Take one piece and pass one of the ends thorough the final link of one side of polyester chain. Fold it in half and attach both ends of black organza to c-crimp cord ends. Use chain nose pliers to close tight around cord ends. Repeat the same with other piece of black organza.
2. Open one 4mm jump ring and attach cord end to half of clasp. Repeat the same with other side of cord ends.
3. Cut gold color stringing wire in 4 equal pieces. Take one piece and feed onto one crimp loop end and use crimper tool to flatten coiled section of loop. Trim excess wire.
4. Using the opposite end of gold wire from previous step, feed on a double metal bead, a bicone crystal, one smoky quartz briolette (make sure the pointed side is upward), a bead cap and a crimp tube.
5. Place crimp 1 ½ inch from the crimped lop. Cover crimp tube with one sparkle and then trim excess wire. Make 3 more of these and set aside.
6. Cut red stringing wire in 3 equal pieces and repeat steps 4 and 5. Invert the position of smoky quartz briolette. Make 2 more of these and set aside.
7. Find center link of polyester chain section, open a jump ring and attach it one of the red wire fringe on in the center of your necklace.
8- Add a sparkle cover bead to the black organza ribbon placing it next to the beginning of grey polyester chain. |
|
