Beadalon - Lucky Charms Necklace and Earring Set

• Lucky Charms Necklace and Earring Set •

• Materials & Tools •

• One 22x15mm 6090 topaz CRYSTALLIZED™-Swarovski Elements pendant
• Two 16x11 6090 topaz CRYSTALLIZED™-Swarovski Elements pendants
• Four 4mm 5000 olivine CRYSTALLIZED™-Swarovski Elements round beads
• Four 4mm 5000 jet AB CRYSTALLIZED™-Swarovski Elements round beads
• Six 4mm 5000 crystal copper CRYSTALLIZED™-Swarovski Elements round beads
• Two 6mm 5301 silk CRYSTALLIZED™-Swarovski Elements bicone beads
• Thirteen 326B-080 silver plated square knot connectors
• Four 326B-060 silver plated square connectors Silver plated our leaf clover charm (Sacred Kitsch Studio) Silver Plated key charm (Sacred Kitsch Studio)
• Two 308B-210 silver plated ear wires
• Ten 314B-221 6mm silver plated oval jump rings
• Two 314B-125 8mm silver plated oval jump rings
• 314B-009 10mm silver plated jump ring
• Two 314B-003 4mm silver plated jump rings
• Ten 314B-109 4mm silver plated oval jump rings
• 323B-001 small silver plated toggle clasp
• Eight 312B-013 silver plated head pins
• Eight 340B-070 1.5” sections small silver plated rolo chain
• Round nose pliers
• Chain nose pliers
• Bent nose pliers
• Wire cutters

Click Here to Enlarge

• Instructions •

1. Create loop topped dangles for all crystal beads.

2. Attach square knot to a chain segment opening the bottom link in the chain with your chain and bent nose pliers.

3. Attach a second square knot to the opposite side.

4. Continue attaching chain to knots making a segmented chain. End on a final square knot.

5. Attach the bar end of a toggle clasp to one of your final square knots using a 4mm round jump ring. Repeat using the circle end and the other final square knot.

6. Attach your beads and charms to the circle end of your toggle using 4mm oval jump rings.

7. Attach the large pendant to the center of your charms and beads on the circle end of the toggle using a 10mm jump ring.

8. To create the earrings attach a knot connector to an ear wire using two 6mm oval jump rings.

9. Attach a second knot connector to the bottom of the first using an 8mm oval jump ring.

10. Attach the small pendant to the bottom with an olivine and a jet AB round using a 6mm oval jump ring.

11. Attach a square knot on each side of the bottom knot using 6mm oval jump rings.

12. Attach a copper crystal bead on each side of the top knot using 6mm oval jump rings.

13. Repeat for second earring.