1. Use Chain-nose Pliers to open a connector and remove a round link from the Quick Links™ Chain.
2. Separate the remaining Quick Links™ Chain into two 9-link sections. Set them aside.
3. String a helix crystal onto a Head Pin and make a wrapped loop to attach it to a loop on the flower Connector.
4. Use a Jump Ring to connect the textured Solid Ring, the upper loop on the flower Connector and the round link from Step 1.
5. Cut a 3" piece of wire and make a wrapped loop to attach it to the round link.
6. Pass the wire through an aqua swirl bead and make another wrapped loop to attach it to an oval Solid Ring.
7. Cut a 2" piece of wire and make a wrapped loop to attach it to the other end of the oval Solid Ring.
8. Pass the wire through an aqua faceted glass bead and make another wrapped loop to attach it to the last link on one 9-link section of Quick Links™ Chain.
9. Repeat Steps 5-8 for the other side of the necklace.
10. Use Chain-nose Pliers to attach the EZ-Lobster™ Clasp to one end of the necklace.
11. Cut the small Cable Chain into approximate 1" lengths.
12. Cut a 5" piece of wire and prepare to make a wrapped loop on one end. Before closing the loop, slide the last link of each 1" piece of chain onto the loop. Then, wrap the loop.
13. Pass the wire through the wide end of a bead cap, aqua swirl, chip, aqua faceted glass bead.
14. Make a wrapped loop to attach the top of the tassel to the textured Solid Ring. |
|
