Home

   
Home Products Design Workshop Blog Where to Buy News About Us Customer Login Here
HOWTO'S
VIDEOS
FAQ'S
DESIGN TEAM
GLOSSARY
• Still Marvelous Necklace •
• Materials & Tools •
• CRYSTALLIZED™ with Swarovski Elements components: *
• 13 6mm crystal golden shadow helix beads - Article 5020
• 21 8mm crystal golden shadow roundelle beads - Article 5040
• 18 9 x 8mm crystal Bordeaux pearls - Article 5826
• 20 9 x 8mm crystal bronze pearls - Article 5826
• 1 gold plated jewelry cable – 3144A-018
• 1 set gold plated large toggle clasp -323A-007
• 18 4mm copper crimp covers – 349P-011
• 2 gold plated scrimp finding cable-ends – 317A-264
• 18 #4 gold plated crimp tubes – JFCT4G-1.5G
• 72 # 1 gold plated crimp tubes – JFCT1G-1.5G
• 2 gold plated oval jump rings – 314A- 125

Tools:
• Flush cutters – 202P-015
• Mighty crimper tool – JTCRIMP3
• Standard crimper tool – JTCRIMP1
Designed By Fernando DaSilva
 
• Instructions •
1. Cut stringing wire in pieces of 5 inches length. Set aside.

2. Using mighty crimper tool place a crimp cover over jewelry cable six inches away from its end and then close over it. Add a second crimp cover next to the first one leaving a very small space between the beads.

3. Put two strands from step 1 of stringing wire together and pass ends through a #4 crimp tube and loop around the cable placing it between the two copper beads and then back into crimp .You will have four strands of stringing wire onto the crimp tube. Keep two strands apart from the other two and then using inside and outside jaws of mighty crimper tool crimp it.

4. String a selection of beads onto wire ends playing with different combinations. Use one bead for each strand and secure beads in place with flatten crimp tube #1.

5. Continue adding closed copper cover for each time you create a fringe. Place two fringes together in the center of necklace on same fashion. Finish bottom fringe of necklace with 9 sections on each side (total of 18).

6. Adjust desired size and add scrimp finding to end of necklace.

7. Use oval jump ring to connect toggle clasp to cable ends.
 

Copyright 2011 Beadalon • sales@beadalon.com