1. Remove 23 link section of small oval Quick Links™ chain, beginning and ending with a large oval link.
2. Attach a lobster clasp to one end with a jump ring.
3. Slide a lined crimp cover over the other end and use either the EZ Crimp™ tool or a Designer Mighty crimp tool to secure cover over edge of link.
4. The last four links on the side without the clasp are intended to be used as an extension chain. Start attaching small diamonds to each large oval after the clasp all the way around the necklace using jump rings until you reach the 10th oval. Leave the remaining two large ovals plain.
5. Attach a crimp cover to each diamond using your choice of tool. If the crimp isn’t open enough, you can use the Designer Bead opener/awl to open the crimps up more.
6. Create the pendant by attaching a small diamond, larger diamond and a large oval together in that descending order using jump rings.
7. Attach this to the 5th small oval from the clasp using a jump ring.
8. Place a crimp cover on each of the first two shapes and three on the large oval.
9. Attach the CZs to the bottom pendant beneath the three crimp covers using two jump rings per dangle working from left to right in the following order: white, purple, lavender, purple, white.
|
|
