• Triple Strand Leather Bracelet • |
|
• 6mm glass pony beads: 2 green, 1 blue, 1 purple
• 2 blue 8mm round glass beads
• 3 silver 10mm bicone metal beads
• 19 ½" length of 1.5mm diameter Brown Greek Leather Cord #136S-015
• 9 silver 2.2x7.5mm Spring Spacers #304D-004
• 6 silver 2.2x7.5mm Spring Cord Ends #304D-004
• 4mm silver Jump Ring #314B-003
• Medium silver Lobster Clasp #315B-005
• 2 silver 3-loop end bars
• Nipper Tool #JTNIP1
• Chain Nose Pliers #201E-002 |
|
|
|
1. Cut the leather cord in three 6 ½" lengths.
2. Place a Spring Cord End on one end of a piece of Leather Cord and use Chain Nose Pliers to squeeze the first ring on the coil; repeat for each strand.
3. Open the loop on one Spring Cord End and connect it to a loop on one of the 3-loop end bars.
4. Leave 1 3/4" and attach a Spring Spacer, string a blue bead, and attach another Spring Spacer.
5. Leave 1" and attach a Spring Spacer, string a green bead, and attach another Spring Spacer.
6. Leave 1" and attach a Spring Spacer, string a silver bead, and attach another Spring Spacer.
7. Attach a Spring Cord End to the end of the strand and connect it to the upper loop on the other 3-loop end bar.
8. Repeat Steps 3-7 to attach two more strands to the bracelet. Start the middle strand 1" from the end instead of 1 ¾" and adjust the bead placement as shown in the photo.
9. Use a jump ring to attach a lobster clasp to one end of the bracelet. |
|
|
|
