Home

   
Home Products Design Workshop Blog Where to Buy News About Us Customer Login Here
HOWTO'S
VIDEOS
FAQ'S
DESIGN TEAM
GLOSSARY
• Tripudio di amore necklace •
• Materials & Tools •
• 1 20mm Fenicio square garnet-red bead *
• 1 22 x 16mm La Crima rectangle gold band lilac-gold bead
• 2 14mm La Crima black splashes round beads
• 1 22mm Bicolor gold silver foil disc
• 6 24mm silver plated textured solid rings – 314B-184
• 3 5 x 22mm gold plated oval textured solid rings – 314A-174
• 23 7 x 9.5mm gold plated oval solid rings - 314A-520
• 5 gold plated ball head pins – 321A-253
• 4 6mm silver plated jump rings - 314B-005
• 5 silver plated separated links of round dash Quick links chain - 340B-350
• 1 gold plated heavy spring ring clasp – 321A-041
• 1ft gold 24 gauge Artistic Wire
• 1 ft brown 24 gauge Artistic Wire
• 1 ft natural 24 gauge Artistic Wire

Tools:
• Chain nose pliers – 201P-011
• Flush cutters – 202P-015
• Round nose pliers - 201P-111
• Artistic Wire twister – 228A-100
• Jump ring maker - 228A-051
Designed By Fernando Dasilva
 
• Instructions •
1. Place the 3 colors of Artistic Wire onto individual holes of disc of the wire twister. Attach the opposite ends of wires onto a single sturdy object. Pull the wires taut, and then start twisting the wires until it breaks by itself.

2. Use jump ring maker to create 5 large round rings with twisted piece of colored wire. Follow the instructions on jump ring maker tool. Set rings aside.

3. Open two 6mm jump rings and attach to ring of heavy spring clasp and then to a link of quick link chain. Close carefully.

4. Open a solid ring inserting closed tips of round nose pliers and open sidewise. Open all the other solid rings and set them aside.

5. Follow pattern given below to connect piece form step 3 to other components: oval small gold ring + quick link + oval small gold ring + quick link + oval small gold ring + oval textured flat ring + oval small gold ring + silver large flat ring + oval small gold ring + one colored wire ring + oval small gold ring + silver large flat ring + oval small gold ring + one colored wire ring + oval small gold ring + silver large flat ring + oval small gold ring + one colored wire. Repeat on reverse to finish attaching all components.

6. Insert largest bicolor Venetian disc onto a ball head pin. Make a half loop using largest portion of round nose pliers. Insert a gold plated oval textured ring onto half loop and then finish wrapping it 3 times.

7. Use a small oval solid ring to attach piece made on previous step to center ring of necklace. 8. Make a wrapped loop on top of each of the beads left and then attach to center section of necklace.
 

Copyright 2011 Beadalon • sales@beadalon.com