Using a Bead Board
A bead board is a must-have tool for planning jewelry designs. It allows you to see what a design will look like before you string it, plus it provides a nice work surface to organize beads and findings while you work.
When beginning a jewelry design, lay the beads in the channels to give you an idea of what the design will look like once it has been strung. Arrange the beads in the outer channel until you are happy with the pattern. I usually start in the center of the necklace and work my way to the ends.
Using a bead board allows you to arrange and rearrange the pattern before you string it. That way you don't have to restring the entire design if you find out that you don't have enough beads to complete the pattern you have in mind.
Use the measurements on the outside of the bead board to determine how the long the design will be. For example, a pattern that reaches 8 on both sides would make a 16" (40.6cm) necklace, which is standard length for a choker. But don't forget to include the clasp, which adds another 1/2 - 1 1/2" (1.3-3.8cm).
| Standard jewelry lengths |
| Choker 15-16" | (38.1-40.6cm) |
| Princess Necklace 18-20" | (45.7-50.8cm) |
| Matinee Necklace 23-27" | (58.4-68.6cm) |
| Bracelet 7" | (17.8cm) |
| Anklet 9-10" | (22.9-25.4cm) |
To make a graduated multiple strand design, lay beads in all three channels. Remember that the outermost strand will be the longest, so plan accordingly when designing the piece. If the longest strand on the design will be 19" (48.3cm), on my board, that makes the shortest strand about 16" (40.6cm) , which is a standard choker length.
|
|
