|
Bail Making pliers offer two sizes of ends (mandrels) that allow the wire artist to bend the wire to make bails or other wire wrapping patterns the same size each time. Beadalon Bail making pliers feature 4 mm and 2 mm ends, or 8 mm and 5 mm ends choose the pliers that has the best sizes for your work. Made of Stainless Steel.
4 mm / 2 mm Ends - Part# 201A-220
B 8 mm / 5 mm Ends - Part# 201A-230
|
|
Aluminum Short Ring Mandrel, great for most sizes of rings from 3.5 to 10.75. This Ring Mandrel is easy to use and does not have a groove which makes it great to use with wire, no flat spots in the ring. The shorter length makes this ring mandrel the one to use when traveling. Made of Aluminum. The anodized color will come off with use, but this does not affect the usability of the tool.
Part# 228A-310 |
|
Use the 4.25” (10.8cm) diameter Kumihimo disc with Beadalon wire to make beautiful, braided necklaces and bracelets. Use multiple metallic colors to create richly patterned braids or use all strands the same color to create more subtle patterns. You can also use the Kumihimo Braiding Disc with leather, hemp or satin cord for chunky braids or use it with silk, nylon or embroidery floss for thinner braids. Helpful instructions included!
4.25" (10.8 cm) Round - Part# 223F-010
6" (15.2 cm) Round - Part# 223F-013
5.5
" (14 cm) Square - Part# 223F-015 |
|
| Kumihimo Tangle-Free Bobbins |
These bobbins are used to wrap your stringing materials around before using the Kumihimo Discs. Each bobbin helps keep your strands tangle free by adding weight and size. Bobbins can also be used to store stringing material.
2.3 in (5.8 cm) 8 pieces - Part# 223F-064
|
|
These exclusive Patent Pending pliers are a must-have tool for making the initial tight band that hold wire designs together. These pliers create the perfect double right angle bend on 20, 21, and 22 gauge Half-Round and 22-24 gauge Square Wires, and is perfectly sized for 20, 21, 22, and 24 gauge Square Wire banding. The double right angle bend in either Square Wire or Half Round Wire fits the corresponding Square Wire, making the first “binding” wrap very tight and secure. This bend reduces the time needed to create professional wire wrapping and stone setting. Each end of the T-shaped head fits a different gauge: Item #201A-289 is sized for 20 and 21 gauge Square Wires. Item #201A-290 is sized for for 22 and 24 Gauge Square Wires. Accepting orders now for delivery October 2011.
For wires 20 & 21 GA: 201A-289
For wires 22 & 24 GA: 201A-290
|
|
| Lazee Daizee Viking Knit Wire Weaving Tool Kit |
The Lazee Daizee Viking Knit All-in-One Tool Kit makes learning the centuries-old woven technique easier than ever! No more start-up prep, dowels or vises - just hold the tool in your hand and start weaving. Adding new wire is easy with the pre-drilled anchor hole while the hexagon-shaped rod limits the need for needle tools that may damage or scratch coated wires. Make your own wire-wrapped end caps with the End Coil Shaper. This kit includes 1 hex rod tool, easy-start head attachment, light weight and durable thermoplastic draw plate, conditioning fabric, end coil shaper, pin tool, #20 and #26 gauge practice wires, and color step-by-step photos and instructions.
Part# 228A-418 |
|
Light weight and durable thermoplastic draw plate with hole sizes ranging from 1/8” (0.31 cm) to 5/8” (1.58 cm).
Part# 228A-414 |
|
| Lazee Daizee Viking Knit Wire Weaving Tool |
Make beautiful woven jewelry in half the time of conventional methods. This tool includes a six-loop easy-start head insert, 1/4” (0.64 cm) rod, pin tool, and color photo instructions with finishing techniques.
Part# 228A-410 |
|
Crinkle Artistic Wires 20 Gauge 0.81mm (.032”) and finer with the Crinkler Tool. Attach like gears onto the base, insert wire into the small hole then catch into the center of the gears. Slowly turn gear with hand until wire is moving through the gears, continue to turn until desired amount of crinkled wire is made. Change gears for a different crinkle pattern. Retail-ready package with instructions containing 2 styles of gears (rounded & pointed) and base.
Part# 228S-060 |
|
Another handy wire working tool Exclusively from Beadalon! These Spiral Makers create perfect spirals out of Artistic Wire, German Style Wire and any other soft wire 20 ga 0.81mm (.032”) and smaller. Use colorful spirals to embellish jewelry, scrapbooks and paper crafts. Use small pieces of the diameter wire you intend to make the spiral as a washer on the three screws. Tighten wing nuts and insert the same gauge wire into the device. Center the wire in the center hole and insert the twister handle so the wire is inside the slit on the handle. Twist the handle until the desired size of coil is reached. Tip: count the number of turns to re-create the same size coils for multiple coils, or perfectly matching earring dangles.
Standard: 5/8” (16mm) (Part# 228A-500)
Large: 1 1/4” (32mm) (Part# 228A-510) |
|
Ring Mandrel without groove is perfect for making wire-wrapped rings and for sizing, made of sturdy but light aluminum, US sizes 0-15. 24.7cm (9.75”)
Part# 228A-300 |
|
The Beadalon Wire Rounder has a small cup bur at its tip that rounds wire ends. Place the end of any gauge ColourCraft, sterling, gold-filled, or gold wire into the cup, push the two firmly together, and twist the tool against the wire for a smooth round end. 5.25 inches (13.3cm). Made in USA.
Part# 208f-001 |
|
| Multi Jump Ring Maker Mandrel |
This handy Jump Ring Maker Mandrel is perfect for making jump rings on the go. Two mandrels are included - the larger size will make jump rings in sizes 6.0mm, 7.3mm, 8.2mm, 9.0mm, and 10.0mm. The smaller tool makes sizes 1.5mm, 2.0mm, 3.0mm, 4.0mm, and 5.0mm. 5.5 inches (14cm).
Part# 228A-200 |
|
Make the Jump Rings you need – in the size and wire gauge you require! The exclusive Beadalon Jump Ring Maker comes in different configurations so you can make just the size you need. Try coiling vivid Artistic Wires into colored Jump Rings to add definition and texture to jewelry designs, or use gold-filled, sterling, or base metal wire to fashion components that complement your designs. Use the Artistic Wire Twister to make pre-twisted color combinations, then make twisted Jump Rings for all your jewelry or craft projects. Easy to use, fast, and fun. Once you try making your own Jump Rings you may never want to stop! Retail-ready package.
A. Part# 228A-050
B. Part# 228A-051
C. Part# 228A-055
 *Do not remove coil from oval mandrels, separate coil while still on the mandrel then cut the rings individually to assure openings are all in the same location. |
|
Place up to 5 wires onto the disc of the Wire Twister, then attach the wires to a sturdy object. Pull the wires taut, turn the crank, and watch the wires twist. Use color combinations to create great looking Jump Rings. Multiple wires, once twisted, have more strength than single wires. Make creating Artistic Wire designs more interesting and fun. Use twisted wires in the Beadalon Jump Ring Maker to create different sizes of round or oval jump rings. Approx. 5 inches (12.7cm).
Part# 228A-100 |
|
| Wire Twister & Jump Ring Maker Combo Set |
Together in one convenient set, you can twist wire and make custom jump rings in the sizes and wire gauges you want! The exclusive Beadalon Jump Ring Maker comes in different configurations so you can make just the size you need. Try coiling vivid Artistic Wires into colored Jump Rings to add definition and texture to jewelry designs, or use gold-filled, sterling, or base metal wire to fashion components that complement your designs. Use the Wire Twister to make pre-twisted color combinations, then make twisted Jump Rings for all your jewelry or craft projects. Use color combinations to create great looking Jump Rings. Once twisted, multiple wires have more strength than single wires. Easy to use, fast, and fun. Once you try making your own Jump Rings you may never want to stop! Retail-ready package.
Part# 228K-075 |
|
Use this special tool to wrap tight, consistent twisted wire lengths. Simple one-pull action and automatic return twists wire quickly into a strand that will not unravel. Great for use with ColourCraft! Cutting blades in center cut soft wire easily. 10.5 inches (26.7cm).
Part# MTWISTER |
|
Specially made for smaller hands. Perfect for lighter duty twisting. 8.25 inches (21cm).
Part# MTWISTERSM |
|
The Deluxe Jig is ideal for forming elaborate loops for jewelry components, including necklace links, ornaments, pins – you’re limited only by your imagination. Adjust the pegs on the jig base to create patterns of your own or follow the pattern-sheet included with the jig. Replicate designs consistently time and time again. The DeluxeJig has a sturdy 4 Inches x 5 Inches (10cm x 13cm) aluminum base with aluminum pegs, this sturdy aluminum construction reduces deformities from prolonged use. The Deluxe Jig is suitable for use with all gauges of Artistic Wire. Wire not included.
Part# JTJIGDEL |
|
You can add an additional twenty Jig Pegs - designed specifically for the Deluxe Thing-a-ma-Jig.
Part# JTJIGDELXPEGS |
|
An inexpensive, entry-level tool that works best with smaller gauge Artistic Wires (20-28 ga.). For light-duty jigging, its compact, lightweight size 3”x4” (7cm x 10cm) makes it well-suited for travel; base and pegs are plastic. Wire not included.
Part# JTJIGBEG |
|
It couldn’t be simpler! Crank wire around the rod as shown and you’ve made a coil spring. Pull the spring off and insert a core wire. Now coil this spring around the larger rod in your kit to form a cylinder bead. Then try shaping it into a bi-cone or sphere. Imagine the possibilities! Tool includes two cranking rods {.063Inches (1.6mm) and .135 Inches (3.4mm) diameter}, a bracket frame with screw and instructions. The Coiling Gizmo® is suitable for use with all gauges of Artistic Wire to make beaded jewelry and other designs. Wire not included.
Part# JTECONWIN |
|
|
