• Aqua Jet Necklace & Earrings • |
|
Necklace:
• Beadalon 7 Strand beading wire, 54” length of .018” diameter black
• 8 aqua 10mm round silver-lined glass beads
• 7 aqua 8mm bicone glass beads
• 30 black 6mm bicone glass beads
• 15 black 8mm glass beads
• 16 silver 6mm tube beads
• 2 silver Beadalon crimp tubes
• silver toggle clasp
• Beadalon Crimp Tool
• Beadalon Wire Nipper
Earrings:
• Beadalon 7 strand
• Beading wire, 5” length of .018” diameter
• 2 aqua 10mm round silver-lined glass beads
• 2 Silver 6mm tube beads
• 2 Beadalon Silver crimp beads
• 2 Beadalon Silver crimp tubes
• 2 silver ear wires
• Beadalon Crimp Tool
• Beadalon Wire Nipper
|
|
|
|
| PROJECT TIP:
Make this tri-color set in other fabulous color combinations like green/purple/gold, black/red/silver or amber/brown/copper.
|
Necklace:
1. Cut the Beadalon 7 into three equal lengths. Hold the wires together and string a crimp tube and half of the clasp. Place the wires back through the crimp tube to attach the clasp. Crimp it.
2. Hold the wires together and string a silver tube, round aqua bead and a silver tube. String a 6mm black bicone onto one strand, an 8mm bicone onto another strand and a 6mm bicone onto the last strand.
3. Hold the wires together and string an aqua bicone. String a 6mm black bicone onto one strand, an 8mm bicone onto another strand and a 6mm bicone onto the last strand.
4. Repeat Steps 2-3 seven more times as shown.
5. String a crimp tube and half of the clasp. Place the wires back through the crimp tube to attach the clasp. Crimp it.
Earrings:
Cut the Beadalon 7 wire in half. String a silver tube, aqua bead, silver tube and crimp bead onto one wire. Crimp the crimp bead on the wire end to hold the beads in place. String a crimp tube onto the other end of the wire. Place the wire through an earring and back inside the crimp tube. Crimp it. Repeat to make a matching earring.
|
|
|
|
