• Beaded Cell Phone Charms • |
|
Purple & Lime
• 20mm purple round shell bead frame
• 12mm lime green shell lentil bead
• 8mm black 3-cut glass bead
• 12mm silver Bead Cap
• 2 silver #1 Crimp Beads
• 2 silver sparkle Crimp Covers
• Purple Beadalon 7
• Black Cell Phone Strap
• Round Nose Pliers
• Chain Nose Pliers
• Wire Cutters |
Gray & Amethyst
• 16mm gray glass coin bead
• Assorted 6mm beads: purple, gray, white
• 2 silver 12mm Bead Caps
• Silver Eye Pin
• 5 silver ball Head Pins
• Silver small Cable Chain
• Black Cell Phone Strap
• Round Nose Pliers
• Chain Nose Pliers
• Crimping Tool
• Wire Cutters |
Hematite & Pearl
• 20mm black rectangular shell bead frame
• 7 dark gray glass chips
• 12mm silver Bead Cap
• 5 silver #1 Crimp Beads
• 5 silver sparkle
Crimp Covers
• Black Beadalon 7
• Black Cell Phone Strap
• Crimping Tool
• Wire Cutters |
|
|
|
Purple & Lime
1. Cut 4" of Beadalon 7.
2. Pass the end through a Crimp Bead, through the ring on the Cell Phone Strap, and back through the Crimp Bead to form a small loop. Crimp it.
3. Place a Crimp Cover over the Crimp Bead and use a Crimping Tool to close it.
4. Pass the long end of the wire through a hole on the shell loop, the black bead, the other shell loop hole, the Bead Cap, the lentil bead and a Crimp Bead.
5. Pass the end of the Beadalon 7 back through the Crimp Bead to form a large loop. Crimp it.
6. Attach a Crimp Cover over the Crimp Bead.
7. Flatten the edges of the Bead Cap onto the lentil bead.
Gray & Amethys
1. Connect an Eye Pin to the ring on the Cell Phone Strap.
2. Pass the Eye Pin through a Bead Cap, coin bead and Bead Cap and make a basic loop.
3. Flatten the edges of the Bead Caps onto the coin bead.
4. Cut five lengths of Cable Chain: ¾", 1", 1 1/8", 1 ¼", 1 ½".
5. Attach the chains to the lower Eye Pin loop.
6. Pass a Head Pin through a 6mm bead and make a wrapped loop to attach it to the end of a piece of Cable Chain from Step 4.
7. Repeat Step 6 for each piece of Cable Chain.
Hematite & Pearl
1. Attach the Eye Pin loop to the ring on the Cell Phone Strap.
2. Pass the Eye Pin through a hole on the bead frame, three chips and the other hole on the bead frame.
3. Make another basic loop on the Eye Pin.
4. Cut two 5" lengths of Beadalon 7.
5. Center the wires through lower loop on the Eye Pin and pass the ends through a Crimp Bead.
6. Slide the Crimp Bead up the wires to define a small loop.
7. Cover the Crimp Bead with a Crimp Cover.
8. Pass each wire end through a chip and Crimp Bead. Crimp it. Attach a Crimp Cover.
9. Repeat Step 8 for each wire end.
|
|
|
|
