 |
| Magical Crimp Forming Tool |
Use these Patented forming pliers with goldfilled or sterling crimp tubes to create sphere shaped fasteners to hold Beadalon wire. String on crimp tube and wire as usual then use the proper size forming tool and slowly form the tube into a sphere by closing the jaws over the tube until it forms the sphere. Patent # 6,941,628 B1
For Wire Diameter: 0.38 mm (.015”) JTCRIMP6
For Wire Diameter: 0.46 mm (.018”) JTCRIMP7 |
|
Ideal for crimping on the go, the Beadalon Pocket Crimper Tool packs full size crimping functionality into a mini size tool. Close and secure Beadalon Crimp Beads and Crimp Tubes with this easy-to-use hand tool.
The inner jaw closes Crimp Beads and Tubes tightly closed with one firm grip; outer jaw rounds-off edges on Crimp Beads for a smooth, professional result. Standard Size 3 3/4 inches (9.5cm). Rivet joint.
Part# JTCRIMP5
|
|
| Designer EZ-Crimp™ Pliers |
The Beadalon EZ-Crimp Pliers are designed to fit exclusive Beadalon EZCrimp Ends and fi ndings. Simply navigate the EZ-CrimpEnd into the jaw of the EZ-Crimp Pliers with the smooth part of the end in the curved tip of the jaw. Next, squeeze completely and repeat if necessary on the full length of the EZ-Crimp End. The connection with the wire is now complete.
Part# JTEZCRIMP |
|
Never fumble closing tiny crimps again! The Micro Crimper is the right tool for securing Beadalon #1 Crimp Tubes and sizes #0 and #1 Crimp Beads. Use one firm squeeze to crimp with the inner-position grooves, then use the outer-position grooves to round off the crimp. The jaw grooves are comparably smaller to make a dependable closure on smaller crimp findings. 5 inches (12.7cm).
Part# JTCRIMP2 |
|
Close and secure Beadalon Crimp Beads and Crimp Tubes with this easy-to-use hand tool. Inner-position grooves Crimp Beads and Tubes tightly closed with one firm grip; outer-position grooves round off edges on Crimp Beads for a smooth, professional result. Use with Beadalon #1 and #2 Crimp Beads or #2 Crimp Tubes. 5 inches (12.7cm).
Part# JTCRIMP1 |
 |
Secure larger Beadalon #3 Crimp Beads or #3, #4 Crimp Tubes with this specially sized crimper tool. Larger surface area provides a full crimp on bigger components without compromising the professional, finished look. 5 inches (12.7cm).
Part# JTCRIMP3 |
 |
| Desginer Dual Crimper Tool |
The Dual Crimper incorporates two medium crimping cavities to fit all of the crimp tubes and beads within the medium range, each cavity is slightly larger (or smaller) than the other to give the user the ability to tighten the crimp properly. Use with Beadalon #1 and #2 Crimp Beads or #2 and #3 Crimp Tubes, as well as other non-standard crimp bead and tube sizes. 53/4 inches (14.76m). (14.9cm).
Part# JTCRIMP4 |
