| Tip: To open Rolo Chain links and thick Jump Rings, place the tips of Needle-nose Pliers inside the link and open the jaws so the link opens slightly. To close the link, place the tips of the pliers on the outside of the link and carefully press the ends together. |
1. Separate one round link (and connector) from the round Quick Links™ Chain.
2. Separate the Rolo Chain length in half and open the link on one end of each piece.
3. Attach one Rolo Chain piece to each end of the 5-link Quick Links™ Chain.
4. Attach the EZ-Lobster™ Clasp to one end of the necklace.
5. Open all of the thick round Jump Rings (see below).
6. Use a thick round Jump Ring to connect a textured oval and a diamond-cut round to the first link on the Quick Links™ Chain.
7. Use a thick round Jump Ring to connect a flat oval and a diamond-cut square to the second link on the Quick Links™ Chain.
8. Use a thick round Jump Ring to connect a circle link from Step 1, diamond-cut square and textured round ring to the center link on the Quick Links™ Chain.
9. Repeat Step 7 for the fourth link on the chain and Step 6 for the fifth link on the chain.
10. Use an oval Jump Ring to attach a crystal ring to the diamond-cut rounds on links 1&5 and the diamond-cut squares on links 2&4.
11. Pass a Head Pin through a cube and make a wrapped loop to attach it to a crystal ring; repeat for each crystal ring.
12. Connect a Pinch Bail to the moon pendant, and then use a standard jump ring to attach it to the textured round ring in the center of the necklace. |
|
