• Mega Memory Wire Necklace • |
|
• 1 1/2 continuous loops - Necklace memory wire, silver plated
(347B-150)
• 16 1/2 in. length - 4mm Black rubber tubing (JRT4.0BLK-05M)
• 2 1/2 in. length - Elongated cable chain, silver plated (340B-010)
• 10 - 3mm Silver round beads*
• 4 - 4mm Silver round beads*
• 3 - 4mm Black Toho cube beads (506-1710)
• 3 - 7.3mm silver amethyst dichroic glass cube beads*
• 1 - 9mm silver amethyst dichroic glass medium spacer bead*
• 2 - 6mm Black bicone fire-polish glass beads (530-0313)
• 1 - Small silver S-hook (313B-010)
• 9 - 1/2 in. Head pins, white plating (312E-001)
• Designer round nose pliers (201E-003)
• Designer memory wire shears (JTMEMCUT1)
• Designer chain nose pliers (201E-002)
• Nipper Tool (JTNIP1) |
|
|
|
1. Cut 1 1/2 loops of necklace wire using memory wire shears. Always use memory wire shears to cut memory wire; the tempered hardness of the wire will ruin the blades of other cutting tools.
2. Using round nose pliers, make a loop on one end of the memory wire.
3. String the rubber tubing onto the wire, then make another loop on the wire end.
4. String a 6mm bicone bead onto a head pin and make a loop above the bead. Attach it to one loop on the end of the necklace. Repeat this to add a dangle to the loop at the other end of the necklace.
5. Attach an S hook to the last link on the chain. Attach the hook to the center of the necklace and use chain nose pliers to squeeze it shut.
6. String a 3mm silver bead, a Toho cube bead and a 3mm silver bead onto a head pin. Make a loop above the top bead. make two additional head pins in this way. Attach them to the chain as shown.
7. String a 3mm silver bead, dichroic cube and a 4mm silver bead onto a head pin. Make a loop above the top bead. Repeat to create two additional beaded head pins. Attach them to the chain as shown.
8. String a 3mm silver bead, dichroic spacer and a 4mm silver bead onto a head pin. Make a loop above the top bead to attach it to the last link on the chain. |
|
|
|
