Mixed berry summer sorbet Necklace

• Mixed berry summer sorbet Necklace •

• Materials & Tools •

• 7 8mm paparadscha Swarovski® round crystal beads *
• 6 8mm fuchsia Swarovski round crystal beads
• 5 8mm burgundy Swarovski round crystal beads
• 8 6mm fuchsia Swarovski round crystal beads
• 7 6mm Indian red Swarovski round crystal beads
• 1 sterling silver 2 strand EZ-crimp toggle - 423G-210
• 2 #2 silver plated crimp tubes – JFCT2S-1.5G
• 26 12mm silver plated round Quick Links – 314B-310
• 7 18x25mm silver plated oval Quick Links – 314B-344
• 3 8x15mm silver plated small oval Quick Links – 314B-340
• 3 Quick Links connectors – 326B-414 40 inches .024 49 Strands • Beadalon® silver plated wire – JW12S-15
• 40 inches .018 7 Strands Beadalon® silver color crinkle wire- JW03S-15-C
• Beadstrom cutters
• EZ-Crimp pliers

Click Here to Enlarge

• Instructions •

Outside strand
1. Feed one end of .024 silver plated wire into the end of the EZ crimp hole, use EZ-Crimp pliers to squeeze smooth part of coiled section until it’s tight; repeat with second strand;

2. String using both wires and cross wires inside of each of the Quick Link rings then through a Swarovski bead. Repeat this method and follow the pattern given in step 3.

3. String beads following pattern given below: Quick link + padparadscha + quick link + fuchsia + quick link + padparadchsa + large oval quick link + burgundy + quick link + fuchsia + oval lg quick link + padparadscha + quick link + burgundy + lg oval quick link + fuchsia + quick link + padparadscha + oval large quick link.

4. Repeat pattern from step 3 in reverse order to finish necklace;

5. Place a small oval quick link inside of the three large oval quick links in the center of the strand using the Quick Links connectors and attach to the wire;

Inside strand:
1. Attach two strands of crinkle wire to the ring on one end of the clasp by crimping both wires with the crimp tube. Cover crimped wire with crimp cover.

2. Repeat same technique used to assemble outside strand keeping the beads and quick links in the following pattern: Indian red + quick link + fuchsia + quick link

3. Repeat pattern from step 1 until the beads are all used;

4. Finish the necklace following step 1 in the reverse order,

5. Attach the completed strands of crinkle wire to the opposite side of the EZ-Crimp clasp (on the ring) with the crimp tube. 6. Cover crimp tube using crimp cover beads.