• Modern Art Necklace & Earrings • |
|
For the necklace:
• Beadalon® 49 Strand wire, .015” diameter, bright color
• Five 8mm faceted blue glass beads
• Ten 6mm frosted blue glass beads
• About 140 light blue seed beads
• Twenty 1.3mm silver crimp beads
• Silver lobster clasp and tag
• Nipper tool
• Crimp tool
For the earrings:
• Beadalon® 49 Strand wire, .015” diameter, bright color
• Six 6mm frosted blue glass beads
• Four 1.3mm silver crimp beads
• Two silver ear wires
• Nipper tool
• Crimp tool
|
|
|
|
PROJECT TIP:
To make the necklace adjustable, add an extension chain to the clasp.
|
Necklace:
1. Cut five 1 1/4" lengths of Beadalon® 49 Strand wire. Set them aside for Step 3.
2. Cut a 17 1/2" length of Beadalon® wire. String a crimp bead 1/2" from the end. String the Beadalon® wire through half of the clasp and back into the crimp bead to form a loop. Use crimping pliers to crimp the crimp bead. String seed beads for 4".
3. String a crimp bead, an 8mm bead and another crimp bead onto the Beadalon® wire but don't crimp the crimp beads yet. Place a 1 1/4" length of Beadalon® wire through the crimp beads and 8mm bead. Adjust it so the wire is centered inside the 8mm bead. Crimp the crimp beads. String a 6mm bead and a crimp bead onto each end of the 1 1/4" wire. Crimp the crimp beads. Repeat this step five times, 1 3/4" apart.
4. String seed beads for 4". String a crimp bead and place the Beadalon® wire through half of the clasp and back into the crimp bead to form a loop. Use crimping pliers to crimp the crimp bead.
Earring:
5. Cut a 2" length of Beadalon® wire. Hold the ends together and string a 6mm bead onto the wires. Push it up the wires to create a 1/8" loop. String a 6mm bead and a crimp bead onto each end of the wire. Crimp the crimp beads. Attach the top loop to an ear wire. |
|
|
|
