Home

   
Home Products Design Workshop Blog Where to Buy News About Us Customer Login Here
HOWTO'S
VIDEOS
FAQ'S
DESIGN TEAM
GLOSSARY
• Nugget Bracelet •
• Materials •
18" (45cm) length of .021"(.53mm) diameter bright
Beadalon® 19
18" (45cm) length of 20-gauge silver ColourCraft® wire
Twelve 20mm turquoise nuggets
Round silver beads: four 4mm, sixty 5mm
Twenty-two 7mm silver spacers
Two silver 1.5mm Crimp Beads
Two silver Double-Cup Bead Tips
One silver Hook & Eye Clasp
Beadstrom™ Chain Nose Pliers
Beadstrom™ Round Nose Pliers
Designed By Katie Hacker
 
• Instructions •
1. Cut the ColourCraft® wire in twelve equal pieces. For each piece: Make a loop (see page 3) on one end, string a turquoise nugget and make another loop. Set them aside.

2. Cut the piece of Beadalon® 19 in half. Hold the ends together and use a Crimp Bead to attach the Bead Tip (see page 3). Connect it to half of the clasp.

3. String one 4mm bead and four 5mm beads on each strand. String a turquoise nugget as shown.

4. String one 5mm bead, one 7mm spacer and one 5mm bead on each strand. String another turquoise nugget. Repeat this step until all of the turquoise nuggets are strung.

5. Repeat Step 2 in the reverse order so that the end of the bracelet is symmetrical with the beginning.
 

Copyright 2012 Beadalon • sales@beadalon.com