• Pearl Cascade Necklace • |
|
• 16 in. length - Beadalon 49 Strand silver plated .024 in. (JW12SP-10FT)
• 1 - EZ–Crimp sterling silver plain toggle (423G-010)
• 2 - Size #2 Crimp beads, silver plated (JFC2S-1.5G)
• 2 - 4mm Crimp covers, silver plated (349B-010)
• 8 - 7mm Dog bone spacer beads, silver plated (510B-090)
• 12 in. length - Elongated cable chain, silver plated (340B-010)
• 7 - 1-to-1 Plain ring end connector, silver plated (326B-330)
• 7 - 8mm Crème round imitation pearl coated glass beads (530-1575)
• 7 - 2 in. Ball star head pins, silver plated (312B-110)
• Designer mighty crimper (JRCRIMP3)
• Designer crimper (JTCRIMP1)
• Designer flush cutter (202E-001)
• Designer Ergo chain nose pliers (201E-020)
• Designer Ergo round nose pliers (201E-030) |
|
|
Designed By Fernando DaSilva |
|
|
1. String each of the 7 pearls onto the 7 ball star head pins.
2. Loop the ends of the head pins and connect to the 1-to-1 plain ring end connectors.
3. Cut chain in varying lengths from 3 links to 10 links, skipping the 9 link size.
4. Attach chain to the ring end connectors of the pearl dangles and lay out with the longest link assembly in the center and the shortest lengths on either outside edge. Arrange other lengths as shown.
5. Using the 16 in. length of Beadalon 49 Strand silver plated .024 in. wire, string on 1 crimp. Then thread on 1 dog bone spacer, then the outermost chain as arranged in step 4. Alternate between chain and dog bone spacers, ending with a dog bone spacer. Follow the last dog bone spacer with a crimp bead.
6. Find the center of the necklace and crimp each of the crimp beads to hold the center design in place in the middle. Cover crimped beads with crimp covers. Close using the mighty crimper tool.
7. Carefully place the end of the 49 Strand wire into one side of the EZ-Crimp clasp. Crimp using the mighty crimper tool. Do the same for the other side of the clasp.
And voilà! Your fabulous necklace is completed, just add a halter top and you are ready for a night on the town. |
|
|
|
