Designer’s tips:
Before you start playing with your components, please read all the instructions to make sure you got a preview of what’s ahead.
You can randomly add CZ-Dropz creating your own color pattern, however you must follow provided graphics if you want the same look. |
1. Cut 17 pieces of 3 inches pink wire.
2. Feed a piece of pink wire onto a wire guardian. Feed through wire guardian on the opposite direction in order to create a pear /drop shape with it.
3. Slide a crimp tube onto one end of pre formed wire, go back through the same crimp tube with other end make sure both ends are side by side and then crimp it securing both ends of wire together. Use a crimp cover to hide crimp.
4. Repeat steps 1 to 3 in order to make 16 more wired links. Set them aside.
5. Use quick link connectors to form an outside chain. Use following pattern: qlcon + ovalql + qlcon + pink link + qlcon + ovalql + qlcon + pink link + qlcon + pink link + qlcon + roundql + qlcon + pink link + qlcon + ovalql + qlcon + pink link + qlcon + squarelink + qlcon + pink link + qlcon + round link .
Repeat pattern on reverse to form the other half of chain and then set aside. Make sure you end up with a 12 pink links length chain.
6. Built a short linked chain on the following pattern:
qlcon + ovalql + qlcon + pink link + qlcon + pink link+ qlcon + ovalql + qlcon + square link + qlcon + pinl link + qlcon + ovalql + qlcon + pink link + qlcon . Set aside.
7. Use chain nose pliers to open one light weight jump ring and slide onto a purple tear drop CZ and then close it gently. Make 3 of more and set aside.
8. Connect inside chain to outside chain on this manner:
First step - Open quick link connector of short chain and attach into third pink link next to round link. Attach connector inside of wire guardian loop. Repeat the same with the opposite end but this time attach connector directly onto round link. It must be slightly off center.
Second step Attach square link from short chain to both square links of long chain using two quick link connectors. Use one connector to attach to each of the square links, making it a triangle like shape of square links.
9. Use one quick link connector to add the last pink link to the center round link. Make sure the wire guardian loop is down.
10. Add EZ lobster clasp attaching it directly to quick link connector.
11. Randomly add tear drops from step 7 using a 4mm jump ring attached to inside loops of wire guardians.
12. Add all CZ gem dropz using light weight jump rings . Attach it directly to wire guardian loops on random pattern. However bottom pink link should have pink tear drop and big round CZs together.
|
|
