Scrimp Findings are an innovative screw finding that takes the place of a crimp. A tiny set screw inside holds Beadalon Bead Stringing Wires in place.
The inside diameter of the Scrimp Findings is approximately 1.04mm (.041 in), and will accomodate up to .024 diameter Beading Wire.
1. Partially unscrew the screw in the Scrimp Finding.
2. Insert Beadalon Bead Stringing Wire into the Scrimp Finding, through a clasp, and back down through the Scrimp Finding. Be sure to leave a loop with some wiggle room. TIP: Use a Wire Guardian where extra abrasion is likely to occur.
3. Tighten the screw using the screwdriver and begin stringing.